Hydro-Metorological Monitoring System

 

Additional Information

The Hydro-Meteorological System is designed as a simple, easily deployed configuration. This system was designed to meet a specific customers application, however it is widely adaptable. The design is based on the customer (or Microcom's in-country personnel) being able to obtain the basic structure elements for field installation from widely available materials (2 inch diameter pipe and 1.5 inch square tubing). The installation is easily accomplished in remote, difficult to reach areas, with a minimum of tools needed.
All components are standard items (please see attached data sheets), which are delivered from the factory with all wiring, conduit and mounting hardware provided. In the configuration shown here that water-level measurement is accomplished with a Submersible Water-Level Pressure Sensor (PN: WL-102-PT). This system will work equally as well with a Shaft Angle Encoder (PN: WL-101-SE) and Float (PN: FS-101-F).
Microcom can design a configuration to meet your specific requirement, or provide just the moitoring elements and let you design a configuration

Featured Products
Hydro-Metorological Monitoring System